Отговори на тема  [ 3 мнения ] 
Програма на С за ATMEGA16 как да я компилирам? 
Автор Съобщение
Ранг: Минаващ
Ранг: Минаващ

Регистриран на: Чет Юни 25, 2009 6:24 pm
Мнения: 14
Мнение Програма на С за ATMEGA16 как да я компилирам?
Здравейте,
моля да ме извините за глупавите въпроси!
Имам една програма за АТМЕГА 16 писана на С (или поне така предполагам).
Тъй като сглобих устройството по схема в Интернет (страницата със схемата и кода спря да се отваря от 2-3 дена) и ми остана само за програмирам микроконтролера, който е atmega16 с предварително свален hex файл, след като до програмирах очаквах да тръгне, но не стана така. Проверих всички връзки от и към микроконтролера, но неще и неще.
Намерих и програмния код и след като се опитах да направя някои промени по него само за пробата се опитах да го компилирам с Avr Studio 4, но тъй като за първи път се занимавам с този продукт, явно пропускам нещо и немога да го компилирам и да създам hex файла.
Някой може ли да ми обясни как точно да компилирам този код?
Дава ми следните грешки:
Код:
Build started 4.9.2011 at 00:04:43
avr-gcc  -mmcu=atmega128 -Wall -gdwarf-2 -Os -std=gnu99 -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -MD -MP -MT eeprom.o -MF dep/eeprom.o.d  -c  ../eeprom.c
../eeprom.c:8:20: error: config.h: No such file or directory
../eeprom.c:9:18: error: comm.h: No such file or directory
../eeprom.c:10:20: error: memory.h: No such file or directory
../eeprom.c:11:19: error: usart.h: No such file or directory
../eeprom.c:19: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'b_bcnt_mode'
../eeprom.c:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'b_status_ready'
../eeprom.c:25: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'b_read_ok'
../eeprom.c:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'read_byte'
../eeprom.c:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'byte_count'
../eeprom.c:38: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'checksum'
../eeprom.c: In function 'pcCommandBytecountMode':
../eeprom.c:56: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:56: error: (Each undeclared identifier is reported only once
../eeprom.c:56: error: for each function it appears in.)
../eeprom.c:56: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:57: warning: implicit declaration of function 'usartRead'
../eeprom.c:57: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:61: warning: implicit declaration of function 'checksum'
../eeprom.c:63: error: 'b_bcnt_mode' undeclared (first use in this function)
../eeprom.c:63: error: 'true' undeclared (first use in this function)
../eeprom.c:63: error: 'false' undeclared (first use in this function)
../eeprom.c:65: warning: implicit declaration of function 'usartSendByte'
../eeprom.c: In function 'pcCommandFirmware':
../eeprom.c:75: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:75: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:78: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:81: warning: implicit declaration of function 'usartSendString_P'
../eeprom.c:81: error: 'BYTE' undeclared (first use in this function)
../eeprom.c:81: error: expected expression before ')' token
../eeprom.c:81: error: '__c' undeclared (first use in this function)
../eeprom.c:82: error: expected expression before ')' token
../eeprom.c:85: error: expected expression before ')' token
../eeprom.c:86: error: expected expression before ')' token
../eeprom.c:87: error: expected expression before ')' token
../eeprom.c:88: error: expected expression before ')' token
../eeprom.c: In function 'pcCommandModify':
../eeprom.c:95: error: 'UINT16' undeclared (first use in this function)
../eeprom.c:95: error: expected ';' before 'baudrate'
../eeprom.c:96: error: expected ';' before 'delay'
../eeprom.c:99: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:99: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:100: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:108: error: 'delay' undeclared (first use in this function)
../eeprom.c:109: error: 'NOP_DELAY' undeclared (first use in this function)
../eeprom.c:111: error: 'baudrate' undeclared (first use in this function)
../eeprom.c:112: warning: implicit declaration of function 'initUsart'
../eeprom.c: In function 'pcCommandReadBlock':
../eeprom.c:123: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c:123: error: 'false' undeclared (first use in this function)
../eeprom.c:126: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:126: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:127: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:134: error: 'byte_count' undeclared (first use in this function)
../eeprom.c:136: warning: implicit declaration of function 'memoryReadBlock'
../eeprom.c:136: error: 'UINT16' undeclared (first use in this function)
../eeprom.c:140: warning: implicit declaration of function 'usartSend'
../eeprom.c:144: warning: implicit declaration of function 'setMemoryAccessEcuRead'
../eeprom.c:147: error: 'true' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandReadByte':
../eeprom.c:154: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c:154: error: 'false' undeclared (first use in this function)
../eeprom.c:156: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:156: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:160: warning: implicit declaration of function 'memoryRead'
../eeprom.c:160: error: 'UINT16' undeclared (first use in this function)
../eeprom.c:160: error: invalid type argument of 'unary *' (have 'int')
../eeprom.c:168: error: 'true' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandStatus':
../eeprom.c:175: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:175: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandUnknown':
../eeprom.c:183: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:183: error: 'UNKNOWN' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandVersion':
../eeprom.c:191: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:191: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:194: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:196: error: 'ROMULATOR_PROTOCOL_MAJOR' undeclared (first use in this function)
../eeprom.c:197: error: 'ROMULATOR_PROTOCOL_MINOR' undeclared (first use in this function)
../eeprom.c:198: error: 'ROMULATOR_PROTOCOL_ID' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandVersionResp':
../eeprom.c:208: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandWriteW':
../eeprom.c:215: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c:215: error: 'false' undeclared (first use in this function)
../eeprom.c:218: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:218: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:219: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:223: error: 'b_bcnt_mode' undeclared (first use in this function)
../eeprom.c:224: error: 'byte_count' undeclared (first use in this function)
../eeprom.c:236: error: 'UINT8' undeclared (first use in this function)
../eeprom.c:236: error: expected ';' before 'i'
../eeprom.c:236: error: 'i' undeclared (first use in this function)
../eeprom.c:236: error: 'ROMULATOR_PROTOCOL_WRITE_RETRIES' undeclared (first use in this function)
../eeprom.c:238: warning: implicit declaration of function 'memoryWriteBlock'
../eeprom.c:238: error: 'UINT16' undeclared (first use in this function)
../eeprom.c:250: error: 'true' undeclared (first use in this function)
../eeprom.c: In function 'pcCommandWriteX':
../eeprom.c:256: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wr_checksum'
../eeprom.c:256: error: 'wr_checksum' undeclared (first use in this function)
../eeprom.c:259: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c:259: error: 'false' undeclared (first use in this function)
../eeprom.c:262: error: 'data_buffer' undeclared (first use in this function)
../eeprom.c:262: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:263: error: 'ROMULATOR_PROTOCOL_READ_TIMEOUT' undeclared (first use in this function)
../eeprom.c:266: error: 'byte_count' undeclared (first use in this function)
../eeprom.c:276: error: 'UINT8' undeclared (first use in this function)
../eeprom.c:276: error: expected ';' before 'i'
../eeprom.c:276: error: 'i' undeclared (first use in this function)
../eeprom.c:276: error: 'ROMULATOR_PROTOCOL_WRITE_RETRIES' undeclared (first use in this function)
../eeprom.c:278: error: 'UINT16' undeclared (first use in this function)
../eeprom.c:283: error: expected ';' before 'j'
../eeprom.c:283: error: 'j' undeclared (first use in this function)
../eeprom.c:298: error: 'true' undeclared (first use in this function)
../eeprom.c: In function 'pcCommand':
../eeprom.c:304: error: 'read_byte' undeclared (first use in this function)
../eeprom.c:304: warning: implicit declaration of function 'usartReadByte'
../eeprom.c:304: error: 'b_read_ok' undeclared (first use in this function)
../eeprom.c:311: error: 'BYTECOUNT_MODE' undeclared (first use in this function)
../eeprom.c:315: error: 'FIRMWARE' undeclared (first use in this function)
../eeprom.c:319: error: 'MODIFY' undeclared (first use in this function)
../eeprom.c:323: error: 'READ_BLOCK' undeclared (first use in this function)
../eeprom.c:327: error: 'READ_BYTE' undeclared (first use in this function)
../eeprom.c:331: error: 'STATUS' undeclared (first use in this function)
../eeprom.c:335: error: 'VERSION' undeclared (first use in this function)
../eeprom.c:339: error: 'VERSION_RESP' undeclared (first use in this function)
../eeprom.c:343: error: 'WRITE_X' undeclared (first use in this function)
../eeprom.c:347: error: 'WRITE_W' undeclared (first use in this function)
../eeprom.c:351: error: 'WRITE_H' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:364: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:364: error: stray '#' in program
../eeprom.c:380:20: error: global.h: No such file or directory
../eeprom.c:391: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'b_status_ready'
../eeprom.c:424: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'checksum'
../eeprom.c:517:2: error: #endif without #if
../eeprom.c:519: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:519: error: stray '#' in program
../eeprom.c:636:2: error: #endif without #if
../eeprom.c:638: error: stray '#' in program
../eeprom.c:708:2: error: #endif without #if
../eeprom.c:710: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:726:16: error: io.h: No such file or directory
../eeprom.c:783: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:783: error: stray '#' in program
../eeprom.c:829:2: error: #endif without #if
../eeprom.c:831: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:847:18: error: main.h: No such file or directory
../eeprom.c:849:24: error: sync_timer.h: No such file or directory
../eeprom.c: In function 'init':
../eeprom.c:926: warning: implicit declaration of function 'initIoPorts'
../eeprom.c:927: warning: implicit declaration of function 'initSyncTimer'
../eeprom.c:930: error: 'USART_BAUD_920000' undeclared (first use in this function)
../eeprom.c:930: error: 'USART_PARITY_EVEN' undeclared (first use in this function)
../eeprom.c:933: warning: implicit declaration of function 'sei'
../eeprom.c: In function 'exec':
../eeprom.c:940: warning: implicit declaration of function 'usartUnreadBytes'
../eeprom.c:944: error: 'b_status_ready' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:965: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:965: error: stray '#' in program
../eeprom.c:1017:2: error: #endif without #if
../eeprom.c:1019: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c: In function 'memoryClear':
../eeprom.c:1070: warning: implicit declaration of function 'memoryWrite'
../eeprom.c: In function 'memoryTest':
../eeprom.c:1089: error: invalid type argument of 'unary *' (have 'int')
../eeprom.c:1108: error: invalid type argument of 'unary *' (have 'int')
../eeprom.c:1137: error: invalid type argument of 'unary *' (have 'int')
../eeprom.c: At top level:
../eeprom.c:1155: error: conflicting types for 'memoryWrite'
../eeprom.c:1070: error: previous implicit declaration of 'memoryWrite' was here
../eeprom.c: In function 'memoryWrite':
../eeprom.c:1161: warning: implicit declaration of function 'setMemoryAccessMcuWrite'
../eeprom.c:1162: warning: implicit declaration of function 'setMemoryAddress'
../eeprom.c:1172: error: invalid type argument of 'unary *' (have 'int')
../eeprom.c: At top level:
../eeprom.c:1185: error: conflicting types for 'memoryWriteBlock'
../eeprom.c:238: error: previous implicit declaration of 'memoryWriteBlock' was here
../eeprom.c:1197: error: conflicting types for 'memoryRead'
../eeprom.c:160: error: previous implicit declaration of 'memoryRead' was here
../eeprom.c: In function 'memoryRead':
../eeprom.c:1201: warning: implicit declaration of function 'setMemoryAccessMcuRead'
../eeprom.c: At top level:
../eeprom.c:1210: error: conflicting types for 'memoryReadBlock'
../eeprom.c:136: error: previous implicit declaration of 'memoryReadBlock' was here
../eeprom.c:1219: warning: conflicting types for 'setMemoryAccessEcuRead'
../eeprom.c:144: warning: previous implicit declaration of 'setMemoryAccessEcuRead' was here
../eeprom.c:1242: warning: conflicting types for 'setMemoryAccessMcuRead'
../eeprom.c:1201: warning: previous implicit declaration of 'setMemoryAccessMcuRead' was here
../eeprom.c:1270: warning: conflicting types for 'setMemoryAccessMcuWrite'
../eeprom.c:1161: warning: previous implicit declaration of 'setMemoryAccessMcuWrite' was here
../eeprom.c:1295: warning: conflicting types for 'setMemoryAddress'
../eeprom.c:1162: warning: previous implicit declaration of 'setMemoryAddress' was here
../eeprom.c:1314: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:1314: error: stray '#' in program
../eeprom.c:1421:2: error: #endif without #if
../eeprom.c:1423: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:1453: warning: return type defaults to 'int'
../eeprom.c: In function 'ISR':
../eeprom.c:1453: warning: type of '__vector_15' defaults to 'int'
../eeprom.c:1454: error: 'ui8_sync_timer_overflow' undeclared (first use in this function)
../eeprom.c:1463: error: 'usart_timeout' undeclared (first use in this function)
../eeprom.c: In function 'sync':
../eeprom.c:1476: warning: 'b_100' is static but used in inline function 'sync' which is not static
../eeprom.c:1478: warning: 'b_100' is static but used in inline function 'sync' which is not static
../eeprom.c: At top level:
../eeprom.c:1487: warning: conflicting types for 'initSyncTimer'
../eeprom.c:927: warning: previous implicit declaration of 'initSyncTimer' was here
../eeprom.c:1548: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:1548: error: stray '#' in program
../eeprom.c:1601:2: error: #endif without #if
../eeprom.c:1603: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:1649: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'usartstatus'
../eeprom.c:1657: warning: 'USART_INT_RX' appears to be a misspelled signal handler
../eeprom.c: In function 'USART_INT_RX':
../eeprom.c:1661: error: 'USART_UCSRA' undeclared (first use in this function)
../eeprom.c:1662: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1662: error: 'RX_STAT_FE' undeclared (first use in this function)
../eeprom.c:1664: error: 'RX_STAT_DOR' undeclared (first use in this function)
../eeprom.c:1668: error: 'RX_STAT_PE' undeclared (first use in this function)
../eeprom.c:1676: error: 'RX_OVR' undeclared (first use in this function)
../eeprom.c:1677: error: 'USART_RMASK' undeclared (first use in this function)
../eeprom.c:1680: error: 'USART_UDR' undeclared (first use in this function)
../eeprom.c:1685: error: 'RX_STAT_OVR' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1689: warning: 'USART_INT_UDRE' appears to be a misspelled signal handler
../eeprom.c: In function 'USART_INT_UDRE':
../eeprom.c:1691: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1691: error: 'TX_FULL' undeclared (first use in this function)
../eeprom.c:1693: error: 'USART_UDR' undeclared (first use in this function)
../eeprom.c:1694: error: 'USART_TMASK' undeclared (first use in this function)
../eeprom.c:1696: error: 'TX_STAT_FULL' undeclared (first use in this function)
../eeprom.c:1699: error: 'USART_UCSRB' undeclared (first use in this function)
../eeprom.c:1699: error: 'USART_UDRIE' undeclared (first use in this function)
../eeprom.c: In function 'usartReceiveBufferOverflow':
../eeprom.c:1710: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1710: error: 'RX_OVR' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1742: error: conflicting types for 'usartRead'
../eeprom.c:57: error: previous implicit declaration of 'usartRead' was here
../eeprom.c:1776: error: conflicting types for 'usartReadByte'
../eeprom.c:304: error: previous implicit declaration of 'usartReadByte' was here
../eeprom.c: In function 'usartReadByte':
../eeprom.c:1786: error: 'USART_RMASK' undeclared (first use in this function)
../eeprom.c:1787: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1787: error: 'RX_STAT_OVR' undeclared (first use in this function)
../eeprom.c:1792: error: 'RX_FE' undeclared (first use in this function)
../eeprom.c:1792: error: 'RX_PE' undeclared (first use in this function)
../eeprom.c:1792: error: 'RX_DOR' undeclared (first use in this function)
../eeprom.c:1797: error: 'RX_STAT_FE' undeclared (first use in this function)
../eeprom.c:1798: error: 'RX_STAT_PE' undeclared (first use in this function)
../eeprom.c:1799: error: 'RX_STAT_DOR' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1821: error: conflicting types for 'usartUnreadBytes'
../eeprom.c:940: error: previous implicit declaration of 'usartUnreadBytes' was here
../eeprom.c: In function 'usartUnreadBytes':
../eeprom.c:1823: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1823: error: 'RX_OVR' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1833: warning: conflicting types for 'initUsart'
../eeprom.c:112: warning: previous implicit declaration of 'initUsart' was here
../eeprom.c: In function 'initUsart':
../eeprom.c:1844: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1850: error: 'USART_F_CPU' undeclared (first use in this function)
../eeprom.c:1855: error: 'USART_UCSRA' undeclared (first use in this function)
../eeprom.c:1867: error: 'USART_UBRRH' undeclared (first use in this function)
../eeprom.c:1868: error: 'USART_UBRRL' undeclared (first use in this function)
../eeprom.c:1871: error: 'USART_UCSRB' undeclared (first use in this function)
../eeprom.c:1881: error: 'USART_PARITY_EVEN' undeclared (first use in this function)
../eeprom.c:1883: error: 'USART_PARITY_ODD' undeclared (first use in this function)
../eeprom.c:1891: error: 'USART_UCSRC' undeclared (first use in this function)
../eeprom.c: In function 'usartFlush':
../eeprom.c:1898: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1898: error: 'RX_STAT_OVR' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1902: warning: conflicting types for 'usartSend'
../eeprom.c:140: warning: previous implicit declaration of 'usartSend' was here
../eeprom.c:1921: warning: conflicting types for 'usartSendByte'
../eeprom.c:65: warning: previous implicit declaration of 'usartSendByte' was here
../eeprom.c: In function 'usartSendByte':
../eeprom.c:1924: error: 'usartstatus' undeclared (first use in this function)
../eeprom.c:1924: error: 'TX_FULL' undeclared (first use in this function)
../eeprom.c:1928: error: 'USART_TMASK' undeclared (first use in this function)
../eeprom.c:1931: error: 'TX_STAT_FULL' undeclared (first use in this function)
../eeprom.c:1933: error: 'USART_UCSRB' undeclared (first use in this function)
../eeprom.c:1933: error: 'USART_UDRIE' undeclared (first use in this function)
../eeprom.c: At top level:
../eeprom.c:1956: warning: conflicting types for 'usartSendString_P'
../eeprom.c:81: warning: previous implicit declaration of 'usartSendString_P' was here
../eeprom.c:1969: error: expected '=', ',', ';', 'asm' or '__attribute__' before '/' token
../eeprom.c:1969: error: stray '#' in program
../eeprom.c:2236:2: error: #endif without #if
make: *** [eeprom.o] Error 1
Build failed with 210 errors and 43 warnings...


Прикачени файлове:
Коментар на файл: Програмен код
honda-rtp-1.2.0.rar [15.28 KiB]
150 пъти
honda-rtp-schematics.pdf [26.33 KiB]
186 пъти
Нед Сеп 04, 2011 10:20 am
Профил
Ранг: Ориентиран
Ранг: Ориентиран

Регистриран на: Пет Авг 07, 2009 4:58 pm
Мнения: 273
Мнение Re: Програма на С за ATMEGA16 как да я компилирам?
Най-отгоре видях, че микроконтролерът, за който е настроено студиото, е АТмега128. Това може и да не даде грешка, защото имената на регистрите може да са едни и същи за двете меги.

Не ти намира *.h фаиловете, виж им имената и в коя директория са.

AVR studio си иска отделно да му се свърже и компилатор - WIN AVR, това направил ли си го?

Съвет: напиши си някоя примерна програма и с нея си запиши контролерът, за да видиш как ще работи.


Сря Сеп 07, 2011 12:49 pm
Профил
Ранг: Форумен бог
Ранг: Форумен бог

Регистриран на: Пет Фев 04, 2005 9:59 pm
Мнения: 6019
Местоположение: София
Мнение Re: Програма на С за ATMEGA16 как да я компилирам?
Провери ли дали hex-а се записва правилно в контролера? Фюзовете програмирал ли си ги и оказано ли е как трябва да са програмирани?

_________________
Warriors of the Night, ASSEMBLER!!!


Сря Сеп 07, 2011 1:14 pm
Профил
Покажи мненията от миналия:  Сортирай по  
Отговори на тема   [ 3 мнения ] 

Кой е на линия

Потребители разглеждащи този форум: 0 регистрирани и 0 госта


Вие не можете да пускате нови теми
Вие не можете да отговаряте на теми
Вие не можете да променяте собственото си мнение
Вие не можете да изтривате собствените си мнения
Вие не можете да прикачвате файл

Търсене:
Иди на:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.
Хостинг и Домейни